Page-4 news - HANNSTAR INDUSTRY

2025-04-01 Focus on the Dynamics of the metal products industry The international standard for aluminized zinc steel sheets has been released, marking a major breakthrough for ChinaISO 8353:2024 "Continuous Hot-dip Galvanized Aluminum-Magnesium Alloy Coated Steel Sheets and Steel Strips for Commodity Grade, stamping Grade and Structural Grade", led by China, has been officially approved and released. This standard was proposed at a relevant international standardization organization meeting in 2018. After years of discussion, consultation and arduous efforts, it was successfully approved for project initiation and finally completed. This is the first international standard led by our country in ISO/TC17/SC12, and it is also the first project formulated by this organization in nearly 20 years. Hot-dip galvanized aluminum-magnesium alloy coated steel sheet and strip products have attracted much attention from global steel enterprises due to their excellent corrosion resistance, high comprehensive cost performance and wide application range. After the successful research and development by Chinese enterprises, the drafting working group actively promoted the development of international standards, filling the gap of relevant international standards and greatly enhancing the international influence of Chinese enterprises in this product field. Galvalume Steel is widely used in industries such as construction, home appliances and automobiles. Its excellent performance provides a reliable guarantee for the products. The release of this international standard will further regulate the market and promote the healthy development of the Galvalume steel industry. Many countries have launched trade investigations into steel products, affecting galvanized steel plates and the likeOn October 29, 2024, at the request of domestic enterprises, the Ministry of Investment and Foreign Trade of Egypt initiated an anti-dumping investigation into imported cold-rolled coil, galv

2025-03-31 A major breakthrough in global metallic materials! These six major products are disrupting the manufacturing industry! Galvalume Steel:"The Golden Armor of the Construction Industry"The latest data shows that over 60% of industrial plants worldwide have shifted to Galvalume roofing! The golden ratio of 55% aluminum and 43.5% zinc has a corrosion resistance three times that of ordinary galvanized steel!Galvanized Steel:"A century-old master plays with new technology"Tesla's latest energy storage factory has been exposed: All are made of nano-galvanized steel plates! The anti-rust lifespan has exceeded 50 years, and the cost has dropped by 18% directly!Aluminum Coil/Pipe/Plate:"Lightweight Revolutionary Nuclear Weapons"A Big Reveal of Boeing 787 Fuselage Materials: Aviation-grade Aluminum Plates Reduce Weight by 30%! New energy vehicle manufacturers are frantically competing, and global demand is expected to soar by 200% in 2024!Stainless Steel:"The Invisible Guardian of the medical Field"The world's first case! Antibacterial stainless steel was successfully implanted into the COVID-19 ICU equipment, with a killing rate of 99.9%! The FDA's emergency certification has sparked a rush to buy!Aluzinc Steel:"The New Favorite in the Photovoltaic Industry"Shocking! All the brackets of the world's largest photovoltaic power station have been replaced with Aluzinc, increasing weather resistance by 400%! It can easily withstand the extreme desert environment for 50 years!Prepainted Steel:"Breathing Building Materials"The exterior wall of the Dubai Museum of the Future Reveals: Self-healing Color-coated Steel Plate Scratches Heal Automatically! Global architects' selection of "Essential Materials for 2024"!? Industry Barometer:✔️ New EU rule: All infrastructure projects must use Galvalume/Aluzinc from 2025✔️ The World Steel Association predicts that the pre-coated steel market will reach $32 billion✔️ exper

2025-03-10 From Anti-corrosion to Aesthetics: How Are Six Major Metal Materials Driving a Sustainable Building Revolution? With the surging demand for high-performance and environmentally friendly metal materials in the global construction and manufacturing industries, Galvalume Steel, with its revolutionary technology of 55% aluminum-zinc alloy coating, has become the preferred choice for industrial plants and logistics warehouses. Its corrosion resistance is more than four times that of traditional galvanized sheets, and it also has excellent heat resistance (able to withstand a long-term temperature of 315℃), providing a reliable solution for applications in harsh environments.Meanwhile, Galvanized Steel continues to dominate areas such as building structures and transportation facilities, thanks to its mature anti-corrosion performance and cost advantage. The introduction of the latest environmentally friendly chromium-free passivation process has further enhanced its sustainability and met the global RoHS and REACH standards.Under the trend of lightweighting, Aluminum Coil/Pipe/Plate, with its excellent strength-to-weight ratio and 100% recyclability, has become the core material for new energy vehicles, photovoltaic brackets and modern curtain walls. The wide application of 3003/5052 series aluminum alloys has promoted the rapid development of green buildings and low-carbon manufacturing.Stainless Steel continuously innovates in the fields of high-end architecture and industry. 316L molybdenum-containing stainless steel demonstrates outstanding resistance to chloride ion corrosion in coastal projects, while antibacterial grade 304 stainless steel has become the preferred choice for medical facilities.With its unique alloy structure, Aluzinc Steel has an anti-corrosion performance six times that of galvanized sheets and a solar reflectivity of 83%, contributing to the development of energy-efficient buildings.Prepainted Steel, through PVDF fluorocarbon coating technology, achieves a 20

2025-03-05 Steel Industry Sees Strong Growth Amid Rising Global Demand Qingdao, Mar 5th – The global steel industry is witnessing unprecedented growth, fueled by surging demand across construction, automotive, and infrastructure sectors. As industrial activities intensify worldwide, leading manufacturers are scaling production to meet market needs. HANNER STAR Announces Major Expansion to Meet Growing Demand HANNER STAR, a premier steel producer, has unveiled a strategic $1 million investment to upgrade its production facilities. This expansion will integrate cutting-edge technologies to boost efficiency and sustainability across its product lines, including: Galvalume Steel – Enhanced coating technology for superior corrosion resistance Galvanized Steel – Advanced galvanizing processes for durable protection Prepainted Steel – Eco-friendly coating solutions for architectural applications Stainless Steel – Precision-rolled coils for high-performance industrial use Aluminum Coil – Lightweight alternatives for automotive and aerospace sectors Nickel Strip – Specialty products for battery and electronics manufacturing "This expansion reflects our commitment to innovation and sustainability," stated Edwin Li, CEO of HANNER STAR. "By modernizing our facilities, we can deliver premium Galvalume Steel, Stainless Steel, and other advanced materials while reducing our environmental footprint." Key Expansion Highlights: 10% Capacity Increase – Strengthening supply of Galvanized Steel and Aluminum Coil productsGreen Manufacturing – Lowering carbon emissions in Prepainted Steel production

2025-02-18 A global metal feast! Six cutting-edge materials ignite international exhibitions and lead a new wave in the industry! Cutting-edge materials, defining the future! From the super-corrosion-resistant Galvalume Steel to the lightweight Aluminum solutions, from the classic Galvanized Steel to the revolutionary Stainless Steel, and to the high-appearure-level Prepainted Steel - the world's top metal technologies are gathered here. Provide stronger, lighter and more durable innovative options for industries such as construction, automobiles, energy and healthcare! Explore infinite possibilities and lead industry transformation! Galvalume Steel:The "King of Corrosion Resistance" makes a stunning debut! Super anti-corrosion performance + 30-year lifespan, the ultimate choice for the construction and home appliance industries!Galvanized Steel:Classic again! The world's first "ultra-thick zinc coating" technology, setting a new benchmark in the fields of automotive manufacturing and power towersAluminum Coil/Pipe/Plate:The lightweight revolution is coming! Core materials for aerospace and new energy vehicles, with strength increased by 50% and weight halved!Stainless Steel:A technological breakthrough that "never rusts"! Medical and food-grade special steel, antibacterial and acid-resistant, safe and worry-free!Aluzinc Steel:"Bimetallic Protective Shield"! More weather-resistant than traditional galvanizing, the golden partner for roofs and curtain walls!Prepainted Steel:"Color Instant Combat Power"! Over 100 custom color series, self-cleaning coating, a perfect blend of architectural aesthetics and functionality!

2025-01-15 Future Metal : Galvalume has a lifespan of over 50 years, and pre-coated steel plates can be automatically repaired! In today's highly competitive materials market, our company makes a strong move. With six core metallic materials, namely Galvalume Steel, Galvanized Steel, Aluminum Coil/Pipe/Plate, Stainless Steel, Aluzinc Steel and Prepainted Steel, It leads a new round of industry transformation and attracts high attention from the market. 1、Galvalume Steel: A New Revolution in Coastal ConstructionThe recently developed Galvalume Steel aluminized zinc steel plate has achieved a major breakthrough. Through an exclusive process, 55% aluminum and 45% zinc are perfectly alloyed to form a coating with outstanding corrosion resistance. According to authoritative tests, its salt spray resistance is four times higher than that of ordinary galvanized steel, and it can easily cope with the harsh environment of high salt and high humidity in coastal areas. In a key coastal construction project, the roofing and wall system of Galvalume Steel was used. The designed service life is as long as 50 years, far exceeding the industry average level. It greatly reduces the later maintenance cost and sets a new benchmark for the coastal construction field. 2、Galvanized Steel: Cost-effectiveGalvanized Steel sheets continue to sell well in the market. The company adopts advanced hot-dip galvanizing and electroplating processes, precisely controlling the coating thickness from 80 to 600g/㎡ to meet diverse anti-corrosion requirements ranging from 5 to 50 years. With a highly competitive cost advantage, it is only one-third the price of stainless steel but can meet 80% of the conventional anti-corrosion scenarios, and is deeply favored by the construction, automotive and other industries. Recently, the company has successfully won bids for several large-scale building steel structure projects. With the reliab

2024-12-31 Galvalume, Aluminum and Prepainted Steel Drive Sustainable Construction Trends As the global construction, automotive, and appliance industries continue to recover, demand for high-performance metal building materials has seen significant growth. According to the latest data from industry analysts, Galvalume Steel and Galvanized Steel, valued for their superior corrosion resistance and cost efficiency, are gaining market share in roofing, cladding, and automotive components. The global market size for these materials is projected to exceed $150 billion in 2024.Differentiated Demand in Aluminum Products, Driven by High-End ApplicationsAluminum coils, pipes, and plates (Aluminum Coil/Pipe/Plate) have experienced a 12% year-on-year increase in procurement for electric vehicle lightweighting and solar mounting systems. However, due to fluctuating international aluminum prices, some manufacturers are shifting toward Aluzinc Steel to balance performance and cost. Additionally, accelerated infrastructure investments in Southeast Asia have boosted aluminum imports, with China’s exports rising by 8.3%.Stainless Steel Industry Faces Pressure from Green TransitionAustenitic and duplex Stainless Steel maintain steady demand in chemical and food processing industries. However, the EU’s Carbon Border Adjustment Mechanism (CBAM) is pushing companies to invest in low-carbon steelmaking technologies. Some manufacturers are already adopting recycled stainless steel raw materials to comply with ESG standards.Prepainted Steel Gains Popularity in ConstructionWith the growing adoption of green building certifications (e.g., LEED), Prepainted Steel—featuring customizable colors, weather resistance, and eco-friendly coating technologies—is seeing increased use in facades and modular construction. Major producers are accelerating the development of VOC-free coatings to meet stringent regulations in North America and Europe.Challenges and Opportunities Ahead

2024-12-31 Metal Materials Industry Update: The latest market trends of Galvalume steel, galvanized steel, color-coated steel sheets and aluminum coils Metal Materials Market Report for the Third Quarter of 2024 1.The global demand for Galvalume steel has soared, and the new energy sector has become a new growth pointAccording to the latest data from the International Iron and Steel Institute, global demand for Galvalume steel is expected to reach 8.5 million tons in 2024, representing a year-on-year growth of 15%. It is particularly worth noting that the order volume of Galvalume steel for photovoltaic brackets and energy storage facilities has increased by 40% compared with the same period last year. Industry experts point out that the excellent weather resistance of its 55% aluminum-zinc alloy coating makes it an ideal choice for new energy infrastructure.2.The price of galvanized steel has stabilized, and the Southeast Asian market has performed outstandinglyData from the London Metal Exchange shows that the spot price of galvanized steel has remained stable over the past three months, maintaining within the range of $780- $810 per ton. Due to the concentrated launch of infrastructure construction projects in Southeast Asia, the import volume of galvanized steel increased by 23% year-on-year. A large-scale bridge project in Vietnam recently purchased 25,000 tons of galvanized steel for the construction of the main structure.3. The innovative technology of color-coated steel sheets leads the new trend in architectureThe latest trends in the construction industry show that the market share of nano-coated color-coated steel sheets with self-cleaning functions has increased to 35%. In a recently released plan by a well-known international architectural firm, it specifically designated the use of PVDF-coated color-coated steel sheets with a 30-year warranty. Industry insiders predict that the global color-coated steel sheet market size will exceed 30 bill

2024-07-20 Diverse materials compete in the market, and the steel industry leads the future with innovation Driven by the dual forces of the accelerated transformation of the global manufacturing industry and the continuous heating up of infrastructure investment, Core metallic materials such as Galvalume Steel, Galvanized Steel, Aluminum Coil/Pipe/Plate, Stainless Steel, Aluzinc Steel and Prepainted Steel It is reshaping the competitive landscape of the steel industry with strong market vitality and technological innovation. Galvalume Steel has become the "new favorite" in the fields of construction and industry with its disruptive anti-corrosion technology. The alloy coating composed of 55% aluminum, 43.4% zinc and 1.6% silicon has been shown by salt spray test to have a corrosion resistance life that is more than three times that of pure galvanized steel plates. In the latest research by the American Commercial Building Association, over 60% of new commercial buildings use aluminized zinc steel plates for their roofs. Among them, a landmark office building project in Los Angeles has extended the building's maintenance cycle to 25 years by applying this material, significantly reducing the total life cycle cost. In the home appliance sector, an international home appliance giant has fully applied aluminized zinc steel plates to the production of refrigerator back plates. The anti-rust ability of the products in the high-humidity coastal environment has significantly improved, driving the annual growth rate of market demand to exceed 12%. As a mainstay of traditional anti-corrosion materials, Galvanized Steel is consolidating its market position through technological iterations. Data from the China Iron and Steel Association shows that in 2024, the application volume of galvanized steel sheets in agricultural greenhouses, light steel residences and other fields still accounted for more than 45%. To address the challenges posed by new materials, enterprises such as Baosteel have introduced high-alumina galv

2024-07-10 Green manufacturing drives the upgrading of metal materials With the increase in global infrastructure investment and the rapid development of the new energy industry, Metal materials such as Galvanized Steel, Prepainted Steel, Galvalume Steel, Stainless Steel, Aluminum Coil and Nickel Strip are experiencing a new round of peak market demand. Industry experts predict that the global market size of these key materials will maintain a growth rate of 6% to 8% in 2024.Analysis of Industry Hotspots：The demand for galvanized steel is stableBenefiting from the recovery of the global construction industry, galvanized steel is in high demand in fields such as roofing and steel structures due to its excellent anti-corrosion performance. The Southeast Asian market stands out particularly. Infrastructure projects in countries such as Vietnam and Indonesia have driven a 15% year-on-year increase in imports.The application scenarios of color-coated steel sheets have been expandedColor-coated steel sheets, with their rich color options and weather resistance, are penetrating from traditional building envelope systems into the fields of home appliances and decoration. Leading domestic enterprises have launched anti-UV aging coating technology, extending the product life to over 20 years.Aluminized zinc steel is the preferred choice for photovoltaic bracketsIn the field of new energy, aluminized zinc steel has become the core material of photovoltaic bracket systems due to the heat resistance of its 55% aluminized zinc alloy coating. The global photovoltaic installed capacity is expected to exceed 400GW in 2024, which will further boost demand.The trend of high-end stainless steel is obviousWith the increase in investment in hydrogen energy equipment and chemical projects, the demand for high-end stainless steels such as 316L has soared. Due to the accelerated

2024-06-01 Innovations and Market Trends in Key Materials The global steel and metal industry continues to evolve, driven by technological advancements and increasing demand for high-performance materials. Leading manufacturers are focusing on Galvanized Steel, Prepainted Steel, Galvalume Steel, Stainless Steel, Aluminum Coil, and Nickel Strip to meet diverse industrial needs, from construction to renewable energy and electronics. Market Developments & Technological Advancements Galvanized Steel:Demand remains strong in automotive and construction sectors due to its superior corrosion resistance. New zinc-coating technologies are enhancing longevity while reducing environmental impact. Prepainted Steel:Architects and builders are increasingly adopting prepainted steel for aesthetic and functional benefits, with innovations in weather-resistant coatings expanding its use in façades and roofing. Galvalume Steel:Combining the durability of aluminum and the strength of steel, Galvalume is gaining traction in solar panel frameworks and agricultural storage, thanks to its heat reflectivity and rust prevention. Stainless Steel:The rise of green hydrogen and chemical processing industries is boosting demand for high-grade stainless steel, particularly in corrosive environments. Aluminum Coil:Lightweight and recyclable, aluminum coils are critical for electric vehicle (EV) battery casings and aerospace applications, with manufacturers investing in energy-efficient rolling techniques. Nickel Strip:With the EV boom, nickel strips are essential for lithium-i

2024-05-21 The global high-end metal materials market is embracing new development opportunities As the basic material of modern industry Galvalume Steel, Galvanized Steel, Aluminum Coil/Pipe/Plate, Stainless Steel, Aluzinc Steel and Prepainted Products like Steel are shining brightly in fields such as construction, automobiles, home appliances, and new energy, thanks to their outstanding performance and environmental protection features.1.Aluminized zinc steel and aluminized zinc alloy steel: The two shining stars in the field of corrosion resistanceAluminized zinc steel (55% aluminum, 43.4% zinc, 1.6% silicon) has become the preferred material for building roofing and exterior wall enclosure systems due to its outstanding corrosion resistance and heat resistance. Aluminum-zinc alloy steel has further optimized its performance on the basis of aluminum-zinc coated steel. Its corrosion resistance is 2 to 6 times that of ordinary galvanized steel, making it particularly suitable for harsh environments such as coastal areas and chemical plants. According to the latest market research, the global market size of aluminized zinc steel is expected to exceed 15 billion US dollars in 2024, with an annual growth rate remaining above 7%.2. Galvanized steel: An innovative breakthrough of traditional materialsAs the most widely used anti-corrosion steel, galvanized steel is undergoing technological innovation. The new type of high-strength galvanized steel not only maintains excellent anti-corrosion performance but also increases tensile strength by more than 30%, providing an ideal solution for the lightweighting of new energy vehicle bodies. Industry forecasts suggest that by 2026, the global demand for galvanized steel will reach 250 million tons, with high-strength galvanized steel for automobiles accounting for more than 25%.3. Aluminium materials: Star materials for green transformationDriven by the "dual carbon" goals, aluminum

2024-05-09 Higher purity nickel is better for various reasons Understanding Nickel Purity & Its Critical Role in Industrial Applications What Determines Nickel Purity? Nickel purity is defined by the concentration of residual impurities (iron, copper, sulfur, etc.) and is quantified as percentages like 99.9% or 99.99%. Advanced refining techniques—including electrorefining and hydrometallurgical processes—remove these contaminants to meet industry-specific standards. Why Higher Purity Matters Corrosion Resistance High-purity Nickel Strip outperforms Galvanized Steel and Galvalume Steel in harsh environments, resisting oxidation and chemical degradation. Critical for marine and chemical processing equipment where lower-grade metals fail. Mechanical Performance Superior tensile strength and ductility vs. standard Stainless Steel or Aluminum Coil variants. Essential for aerospace components and high-stress structural applications. Electrical Conductivity Pure nickel’s conductivity surpasses coated alternatives like Prepainted Steel, making it ideal for: Battery components (EV industry) Precision electrical connectors Thermal Stability Higher melting point than Galvalume Steel or Galvanized Steel, suitable for: Heat exchangers Power generation turbines Material Compatibility Minimizes contamination risks when alloyed with other metals (e.g., Stainless Steel production).

2024-05-06 Nickel strip processing and export Nickel processing refers to the various methods used to extract and refine nickel from its ores. The process typically involves crushing and grinding the ore, followed by a series of physical and chemical processes to separate the nickel from other elements. These processes may include flotation, magnetic separation, and leaching. Once the nickel has been extracted and refined, it can be further processed into various forms, such as nickel cathodes, nickel briquettes, or nickel powder. These forms are then ready for export to other countries. In the global metal market, nickel is not alone. It is part of a diverse range of metal products, including Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, Nickel Strip, and Prepainted Steel. Each of these products has its unique properties and applications, contributing to different industries and construction projects. The export of nickel, Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, Nickel Strip, and Prepainted Steel is a significant industry in many countries. Nickel, as a valuable metal, is used in various applications, including stainless steel production, batteries, and electronics. Galvalume Steel offers excellent corrosion resistance, making it suitable for roofing and siding. Galvanized Steel, with its protective zinc coating, is widely used in construction and infrastructure. Aluminum Coil is essential in the manufacturing of packaging, automotive parts, and electrical appliances. Stainless Steel is renowned for its durability and hygiene, finding applications in kitchenware, medical equipment, and architecture. Nickel Strip plays a crucial role in battery and el

2024-05-02 The production process of nickel tubes The production process of nickel tubes typically involves the following steps: Raw Material Selection: Nickel tubes are manufactured using high-quality nickel alloys. The raw materials are carefully selected based on their composition, purity, and desired properties. Similar to the meticulous selection of nickel alloy raw materials, the production of Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, Nickel Strip, and Prepainted Steel also hinges on the careful choice of base materials. Each of these materials has its own set of criteria for raw material selection, ensuring the end products meet the diverse demands of various industries. Melting and Casting: The selected raw materials are melted in a furnace at high temperatures. The molten metal is then cast into the desired shape, usually in the form of billets or ingots. In the case of Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, and Nickel Strip, their manufacturing processes also involve melting and casting, although the specific alloys and casting techniques may vary according to the unique characteristics of each material. For example, aluminum coils require precise control of melting temperatures to ensure the quality of the final product, while stainless steel casting demands strict adherence to alloy proportions. Billet/Ingot Rolling: The cast billets or ingots are then rolled into thin strips or plates using hot rolling mills. This process helps to reduce the thickness

2024-04-30 The Use and Benefits of High Purity Nickel Strip High purity nickel strip, also known as pure nickel strip or pure nickel ribbon, is a thin, flat piece of metal that is primarily composed of nickel with a high level of purity. In the realm of metal materials, it stands alongside other notable products such as Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, and Prepainted Steel, each with its own distinct characteristics and applications. Nickel strip, with its high purity, is commonly used in various industries and applications due to its unique properties and benefits. Here are some of the uses and benefits of high purity nickel strip, as well as how other metal materials like Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, and Prepainted Steel contribute to different sectors: Battery manufacturing: High purity nickel strip is widely used in the production of rechargeable batteries such as lithium - ion batteries. It is an essential component in the battery's electrode, providing excellent electrical conductivity and corrosion resistance. The high purity of the nickel strip ensures optimal performance and longer battery life. In contrast, Galvalume Steel, with its zinc - aluminum alloy coat

2024-04-26 The advantages of colored aluminum In the realm of metal materials, each type brings its own set of unique attributes. Colored aluminum, with its distinct advantages, stands alongside other notable materials like Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, Nickel Strip, and Prepainted Steel, all contributing to a wide range of industrial and architectural applications. Aesthetic appeal: Colored aluminum adds a vibrant and modern look to any project or application. It enhances the visual appeal and can be used to create eye-catching designs. Similarly, Prepainted Steel offers a wide array of colors and finishes, enabling the creation of visually striking structures. Galvalume Steel, with its metallic sheen, provides a sleek and contemporary appearance suitable for industrial and commercial buildings. Galvanized Steel, while often more utilitarian in its natural state, can also be painted to achieve various aesthetic effects. Stainless Steel, with its polished or brushed finishes, exudes a high-end, sophisticated look, commonly seen in luxury architectural projects and high-end consumer products. Nickel Strip, though not typically associated with color for aesthetic purposes in the same way as the others, can have a metallic luster that adds a touch of elegance in certain applications, such as in the electronics industry where its appearance may c

2024-04-22 The production process of colored aluminum The production process of colored aluminum involves several steps to achieve the desired color and finish. In the broader context of metal material manufacturing, different metals and alloys like Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, Nickel Strip, and Prepainted Steel each have their unique production processes, yet there are also some parallels and differences worth exploring. Here is a general outline of the colored aluminum production process alongside relevant information about other materials: Pre-treatment: The aluminum surface is cleaned and prepared for the coloring process. This step typically involves degreasing and etching the surface to remove any impurities and create a suitable surface for the color to adhere to. Similarly, before further processing, Galvalume Steel, Galvanized Steel, and Stainless Steel also require pre-treatment steps. Galvalume Steel and Galvanized Steel often need to be cleaned to remove dirt, oils, and other contaminants that could affect the integrity of subsequent coatings or processes. Stainless Steel may undergo pickling and passivation during pre-treatment to remove surface oxides and enhance its corrosion resistance. Aluminum Coil, which serves as the base material for colored aluminum in many cases, also starts with a thorough cleaning process. Nickel Strip and P

2024-04-15 The characteristics of stainless steel coils determine their advantages in exporting to China Characteristics of stainless steel pipes 1. Corrosion resistance: Stainless steel pipes are highly resistant to corrosion, making them suitable for various applications in industries such as chemical, oil and gas, and water treatment. 2. High strength: Stainless steel pipes have excellent strength and can withstand high pressure and temperature conditions. 3. Durability: Stainless steel pipes have a long lifespan and can withstand harsh environmental conditions without deteriorating. 4. Heat resistance: Stainless steel pipes can withstand high temperatures without deformation or structural damage. 5. Hygienic properties: Stainless steel pipes are non-toxic and do not release any harmful substances, making them suitable for applications in the food and beverage industry. 6. Low maintenance: Stainless steel pipes require minimal maintenance and are easy to clean, reducing operational costs. 7. Aesthetic appeal: Stainless steel pipes have a sleek and modern appearance, making them suitable for architectural and decorative applications. 8. Weldability: Stainless steel pipes can be easily welded, allowing for efficient installation and assembly. 9. Versatility: Stainless steel pipes come in various sizes, shapes, and grades, making them suitable for a wide range of applications. 10. Recyclability: Stainless steel pipes are 100% recyclable, making them an environmentally friendly c

2024-04-11 The 2024 Canton Fair is about to begin. The Guangzhou Exhibition, also known as the China Import and Export Commodity Fair, is a comprehensive international trade exchange fair with a long history, large scale, and high level in China. The exhibition is held in Guangzhou every spring and autumn, with each session lasting about 15 days. According to official news, the schedule for the spring 2024 Guangzhou exhibition is as follows: Extension date: April 15th, 2024 - April 30th, 2024Transaction time: April 15th, 2024 - April 20th, 2024Opening time: 9:00 am on April 15, 2024Closing time: 5 pm on April 30, 2024 Since its establishment in 1957, the Guangzhou Exhibition has become an important window and driving force for China's foreign trade. It attracts buyers and suppliers from all over the world, promoting the prosperity and development of global trade. Among the diverse range of products showcased at the exhibition, metals and metal products play a significant role. Materials such as Galvalume Steel, Galvanized Steel, Aluminum Coil, Stainless Steel, Nickel Strip, and Prepainted Steel are often on display, highlighting China's strength in the metal manufacturing sector. Here are some of the importance and impact of the Guangzhou exhibition. A Pillar of Global Trade: Th

2024-04-07 The production process of stainless steel Stainless steel is produced through a series of steps that involve melting, refining, casting, and finishing. In the realm of metal production, different materials like Galvalume Steel, Galvanized Steel, Aluminum Coil, Nickel Strip, and Prepainted Steel also have their unique manufacturing processes, yet share some similarities in the pursuit of creating high - quality products. The production process of stainless steel typically involves the following steps: Melting: The raw materials used in stainless steel production, such as iron ore, coal, and limestone, are melted in a furnace at high temperatures. This process helps to remove impurities and create a molten metal. In contrast, Galvalume Steel and Galvanized Steel start with steel coils or sheets which are then coated with a zinc - aluminum alloy (for Galvalume Steel) or pure zinc (for Galvanized Steel) through hot - dip processes. Aluminum Coil production begins with melting aluminum ingots, similar to the initial step of stainless steel, but the subsequent processes diverge. Nickel Strip is produced from refined nickel, which is melted and then processed further. Prepainted Steel starts with a base steel sheet that is prepared before the paint application process, and doesn't involve the same complex melting of multiple raw materials as stainless steel. Refining: The molten metal is then refined to adjust the composition and remove any remaining impurities. This is done through processes such as desulfurization, degassing, and alloying to achieve the desired properties of the stainless steel. While Galvalume Steel and Galvanized Steel don't require the same level of internal composition adjustment through refining as stainless steel, they do need to ensure the quality of the coating application. Aluminum Coil refi

2024-04-01 The characteristics of aluminum pipes determine their advantages in exporting to China Characteristics of Aluminum Tubes and Advantages of Exporting from China Characteristics of Aluminum Tubes Lightweight: Aluminum tubes are notably lightweight, facilitating effortless handling and transportation. This characteristic sets them apart from materials like Galvalume Steel, Galvanized Steel, and Stainless Steel, which are heavier due to their composition and are often used in applications where strength and structural integrity are prioritized over weight reduction. For instance, Galvalume Steel with its zinc - aluminum alloy coating and Galvanized Steel with its zinc layer are commonly employed in construction for roofing and structural supports, where their weight is compensated by their durability. Stainless Steel, known for its high - strength and corrosion - resistant properties, is also heavier and is utilized in industries such as food processing, medical equipment, and architecture. On the other hand, Aluminum Coil, sharing the lightweight nature of aluminum tubes, is frequently used in the manufacturing of packaging materials and automotive components where reducing weight can enhance efficiency. Nickel Strip, although thin, has a higher density than aluminum, making it heavier per unit volume, and is mainly used in applications like battery electrodes and electronic connectors. Prepainted Steel, while offering aesthetic and protective benefits, also has a greater weight compared to aluminum tubes. Corrosion-resistant: Aluminum is inherently resistant to corrosion, rendering aluminum tubes suitable for a plethora of applications, including outdoor and marine environments. Similarly, Galvalume Steel and Galvanized Steel are designed to offer excellent corrosion resistance. Galvalume Steel's unique zinc - aluminum alloy coating provides long - lasting

2024-03-28 About the production process of aluminum tubes The Production Process and Applications of Aluminum Tubes Production Process Raw materials: The main raw material used in the production of aluminum tubes is aluminum ingots. These ingots are melted down in a furnace to create molten aluminum. In the realm of metal production, different materials start with their own specific raw forms. For instance, Galvalume Steel and Galvanized Steel typically begin with steel coils or sheets as their base raw materials, which are then processed through hot - dip coating methods. Stainless Steel often starts from a combination of iron ore, chromium, nickel, and other alloying elements that are melted and refined to achieve the desired composition. Aluminum Coil, of course, also starts with aluminum ingots, but the processing path diverges to create a flat, coiled product rather than a tube. Nickel Strip is usually produced from refined nickel, and Prepainted Steel starts with a base steel sheet that is then coated with paint. Extrusion: The molten aluminum is then forced through a die in a process called extrusion. This creates a long, hollow tube shape. The size and shape of the die determine the final dimensions of the tube. Unlike aluminum tubes, Galvalume Steel and Galvanized Steel are not formed through extrusion. Instead, they are coated with protective layers after being shaped into sheets or other forms through processes like rolling. Stainless Steel can be formed into various shapes through processes such as casting, forging, and rolling, but not extrusion for tube - like products in the same way as aluminum. Aluminum Coil is rolled into its coiled form, while Nickel Strip is often produced through processes like cold rolling or drawing to achieve the desired thickness and width. Prepainted Steel is formed by coating a pre -

2024-03-25 The characteristics of aluminum coils determine their advantages in exporting to China Characteristics of Aluminum Coils and Advantages of China's Export Characteristics of Aluminum Coils Lightweight: Aluminum coils are lightweight, which significantly eases transportation and handling during installation. This property contrasts with materials like Galvalume Steel and Galvanized Steel, which, due to their steel base and coating, are heavier. Stainless Steel, known for its durability and strength, also has a higher weight. Nickel Strip, while thin, has a relatively high density compared to aluminum, making it heavier per unit volume. Only Prepainted Steel, depending on the thickness of the steel base and paint layer, may approach the lightweight nature of aluminum coils in some cases, but generally, aluminum coils stand out for their ease of movement in the supply chain and at construction sites. Corrosion resistance: Aluminum coils possess excellent corrosion resistance, rendering them suitable for diverse environments, from coastal areas battered by salt - laden air to industrial settings filled with potentially corrosive chemicals. Galvalume Steel offers corrosion resistance through its zinc - aluminum alloy coating, making it a popular choice for roofing and cladding in similar challenging environments. Galvanized Steel, with its zinc coating, also provides reliable protection against rust. Stainless Steel's inherent chromium - rich oxide layer gives it outstanding corrosion resistance, often used in appli